How to Adjust the Distance of the Honda CRF150L Valve Spacing

BokeStroke - The valve is a component on a 4 stroke engine that functions as a fuel entrance and exit gas from combustion combustion gases. Errors in the tenuous distance of the valve will cause a lot of problems with the engine, including damage to the rocker arm, damage to the cam shaft, the motorcycle can not be stationary and much more. To avoid damage to parts of the engine, then do the valve adjustment correctly.

To adjust the valve on the Honda CRF150L, ​​we need a fuller guage in order to obtain maximum work results. For more details, please read this article to the end and watch the video below, bro.

Steps - Adjusting Distance Distance Honda CRF150L valve

The piston must be in the TDC (top dead center) position, to find out the TDC position we must rotate the crankshaft. Then pay attention to the valve In, if the valve In, then turn the crankshaft slowly, because the TDC position will occur. Where the piston is positioned on top and the Noken is not pressing the valve.

To find out the correct TDC position, then look at the "T" sign on the magnet and the line or point on the centric gear.

After that, adjust the valve in accordance with the recommendations of Honda, with a gap of 0.10 mm in Ex and 0.12 mm Ex.

For more details, watch and subscribe the video below.