How to Front Brake Bleeder, The Easiest Way to Drain Front Disc Brakes

BikeStroke - Welcome back to the motorcycle automotive blog, we will discuss how to drain front disc brake fluid on motorcycles. Actually, to drain the disc brakes and dispose of fake air, a special tool called brake bleeder is needed, but for this article we will use a hose that is the same size as the nipple. This method is the cheapest, safest and fastest way when removing fake air, draining brake fluid and repairing braking systems that use disc brakes. To simplify the work, please watch the video below and don't forget to subscribe, bro.

How to Throw Fake Winds in the Front Disc Brakes

Prepare equipment in advance such as a screwdriver plus, 8 mm ring lock and hose the same size as the brake discharge.

Loosen the front disc brakes using the 8 mm key ring.

Then attach the hose to the front end of the front disc brake and remove the brake master cap / brake fluid tank by using a screwdriver plus.

Loosen the front disc brakes by using the 8 mm ring lock and brake fluid pump by pressing the front disc brake handle.

Pay attention to the hose attached to the nipple, the brake object should come out when we press the front disc brake handle.

Immediately fill the brake master by using a new brake fluid, do not run out of brake fluid in the brake master.

Pressing the disc brake handle open and close the disc brake pads using the 8 mm key ring.
After the braking system returns to normal and all the brake fluid has been drained, tighten the bumps and replace the brake master cap.

For more details, watch this video to the end and don't forget to subscribe first bro ..