1. The first step is to make sure the old Remote Smart Key is in the OFF position, by pressing the remote on the key symbol until the remote's lights turn red.
2. Connect the inspection adapter to 2P entry mode, then connect the red pin to the battery positive terminal.
3. Turn on the remote smart key by pressing the remote on the key symbol until the color turns green.
4. Press the Ignition switch until the ring light on the knob lights up in blue.
5. Turn off the old Honda Smart Key by pressing the key on the remote until the remote lights turn red.
6. Turn on the new Honda Smart Keys Remote that will be registered by pressing the key symbol on the remote.
7. Turn the ignition to the "I" / ON position, if the registration is successful then the ring and indicator lights will turn on 2 seconds and blink 4 times, then the Smart Key light will blink 5 times.
8. If the registration fails then the authentication diagnosis code appears, if the ignition switch is not turned to the "On" position within 2 minutes then the registration fails and repeat step 1.
9. Turn the ignition switch to the "OFF" position then the ring lights & indicators turn on.
10. Turn off the Honda Smart Key remote and repeat step 6 if you want to add a new Honda Smart Key within 2 minutes. Double check that all Honda Smart Key can start the motor.
Note: Use the batteries installed on the motorcycle and make sure the batteries are in good condition.
